We are in Susà, a village near Pergine Valsugana, together with Federico, also known as Valzio, who documented the installation phases of this system built with Valente products through a series of Reels.
The visit takes place on a rainy day—an ideal condition to observe the performance of the anti-rain cover in real time, fully demonstrating its value under actual operating conditions.
The system has been in place for two years and covers a cherry orchard with a planting spacing of 3.50 metres between rows and approximately 1.20 metres between plants.
The decision to install a rain cover arose from the need to prevent cracking, one of the main problems affecting cherries after rainfall: water penetrating the fruit causes it to split, irreversibly compromising its commercial quality. To complete the protection system, a perimeter anti-insect net was also installed, with a 50-centimetre seam to seal the upper gap between one cover and the next, providing continuous protection with no uncovered areas.
For managing the covers, the Rain System was chosen for its fast opening and closing, allowing quick intervention in case of rain without wasting valuable time.
From a structural standpoint, the installation followed a precise technical sequence. The hoods were fixed to the posts to prevent slipping caused by wind pressure on the cover. In the center of each row, V-shaped spacers were installed to connect the rain covers and reduce the so-called “sail effect,” which occurs when wind inflates the cover, putting stress on the entire structure.
The supporting structure consists of 8x12 perimeter posts and 8x8 intermediate posts, with an overall height of 5.3 metres. During the design phase, a tunnel was also included at each head of the system: a practical solution that allows the operator to carry out all operations without continuously entering and exiting the structure, significantly improving daily work efficiency.




















